Two-Stage Pneumatic Damper Actuator, 3-6 & 11-14

Two-Stage Pneumatic Damper Actuator, 3-6 & 11-14

Code: act-D-4070-2



Product Description


D-4070 Two-Stage Pneumatic Actuator

The D-4070 Two Stage Pneumatic Actuator is a multipurpose positioning device used to accurately position small dampers primarily on unit ventilators, Variable Air Volumes (VAVs), terminal units, and small ventilating dampers in response to output signals of a pneumatic controller or electro-pneumatic transducer.

The D-4070 was specifically designed to provide ASHRAE Cycle II and W control of unit ventilators where a minimum of outdoor air (15 to 50%) is admitted during the heating and ventilating stage and gradually increased to 100%, if needed, during the cooling and ventilating stage.

The D-4070 is a direct replacement for existing D-3070 actuators and a functional replacement for older D-255 actuators.

The D-4070 has a first stage nominal spring range of 3 to 6 psig (21 to 42 kPa) and can be furnished with a second stage spring range of either 9 to 12 psig | (63 to 84 kPa) or 11 to 14 psig (77 to 98 kPa). The control air pressure for normal HVAC operation is 0-20 psig. The total stroke of the D-4070 is 2-3/4 inch (70 mm) and is adjustable from 0 to 50% during the first stage of operation.

The D-4070 incorporates several internal and external features that add functional flexibility. A 2-way swivel connection on the actuator cylinder head provides non-binding movement. All actuators have a telescoping piston rod for easy linkage of the damper for attachment points up to 8-3/4 inches (214 mm) away from the face of the actuator (see Figure 2). A swivel ball joint and slotted crank arm connector are furnished on all actuators for optional methods of linkage to the damper.

When used with proportional control, the damper size is limited by the torque requirement.

Replaces Part Number: D-3070-2, D-4070-2