P-8000 Pressure Controller, 2-Positioners, 25 PSIG
P-8000 Proportional or Two-Position Pressure Controller
Shock and vibration tests have proven the durability of the P-8000. The use of flexure levers reduces hysteresis and friction. The P-8000 is available with a low pressure “L” or a high pressure “H” element assembly.
As the pressure in the sensing line increases or decreases, it is measured by the element diaphragm of the P-8000. The pressure change at the diaphragm is transmitted to a system of flexure levers that open and close the control port. This causes the output pressure of the P-8000 to change according to the measured pressure change.
Replaces Part Number: P-8000-6