Series 90 Modutrol IV Motor

Series 90 Modutrol IV Motor

Code: mtr-M9164C1001



Product Description

Manufacturer: Honeywell

Series 90 Modutrol IV Motors

The Series 90 Modutrol IV Motors are spring return and non-spring return modulating proportional control motors. Use these motors with controllers that provide a Series 90 output to operate dampers or valves.

• Replaces M934A, D, M941, M944A, C, D, M945A, D, F, M954, M965, and M975 motors.
• Integral junction box provides NEMA 3 weather protection.
• Integral spring return returns motor to normal position when power is interrupted.
• Motor and circuitry operate from 24 Vac. Models available with factory installed transformer, or a field added internal transformer.
• Quick-connect terminals are standard—screw terminal adapter is available.
• Adapter bracket for matching shaft height of older motors is available.
• Motors have field adjustable stroke (90° to 160°).
• Die-cast aluminum housing.
• Integral auxiliary switches are available factory mounted, or can be field added.
• Nominal timing standard of 30 seconds (90° stroke), and 60 seconds (160° stroke). Other timings available.
• Spring return motors can operate valve linkages form power end or auxiliary end shafts for normally closed or normally open valve applications.
• All models have dual shafts (slotted and tapped on both ends).
• All models have auxiliary switch cams.
• Fixed torque throughout the entire voltage range. • Motors are designed for either normally open or normally closed valves and dampers.
• Field addable interface modules can be mounted in the junction box to upgrade the motor to Series 70 (electronic) control.

Replaces Part Number: M9164C1001


fix: needs correct weight